Detection Module
Medical grade EMG Detection Module
The EPCM001G100 Vital Signs Detection Module is a module that can measure EMG signals and can be read from the module via a wired (SPI) connection. The module is available with a serial communication protocol and is fully compliant with relevant medical device electrical performance standards.
Advanced technology
The most advanced bioelectric signal testing principle is used, and the human body parameters are derived by analyzing the physiological signal characteristics of the human body.
Proprietary software
Nanochap's proprietary software, start measuring and wait for the signal to stabilize, the EMG signal can be observed.
Multi-interface
The interface is expandable, and the module can be connected to a computer USB port via a USB cable.
Product parameters
| Category | Parameters | Detail |
| Operating Parameters | Size | 60 mmx73. 6mm |
| Input Voltage | DC5V | |
| Input current | 160mA | |
| Performance Parameters | Display Accuracy | Tolerance ≤±10%or±2µV |
| Resolution (measurement sensitivity) | ≤2µV（r.m.s.） | |
| System noises | ≤1µV（r.m.s.） | |
| Passband | 10Hz-500Hz（-3dB） | |
| Frequency inaccuracy | ≤±2% | |
| Differential-mode input impedance | ＞5MΩ | |
| Common-mode rejection ratio | ＞100dB | |
| Industrial Frequency Trap | 50 Hz trap filter, attenuated amplitude <5 µV (r.m.s.) | |
| Application | Home medical management, health smart hardware, health management platform, in-vehicle health management, etc. |
Follow us
Get in touch
Nanochap Electronics Co., Ltd
Melbourne: Suite 3, Level 4, 10 Queens road, Melbourne, VIC 3004, Australia.
Phone: +61432800985
Ho Chi Minh city: Level 19, TTC Building, 253 Hoang Van Thu, Ward 2, Tan Binh District, Ho Chi Minh city, Vietnam.
Phone: +84967096581
